• Display Options

• External Monitor or Flat Panel Display Settings

• TV-Out Settings

   Display Options

      The display device must be Enabled, then configured the display mode to your requirements.

• Single Mode: Either the LCD, Monitor, Flat Panel Display or TV as a display device

• Clone Mode: The LCD, Monitor, Flat Panel Display or TV outputting the same view (you can apply different display modes with different resolutions and refresh rates)

• Extended Desktop Mode: The LCD, Monitor, Flat Panel Display or TV outputting a different view

   External Monitor or Flat Panel Display Settings

Turn off the computer. Connect a external monitor or flat panel to the DVI-Out port (may require DVI to VGA converter) and follow the steps below:

1. Turn on the computer.

2. Make sure you have loaded the correct Video driver that was provided by the manufacture.

3. Click the Start menu and select Control Panel. Click Appearance and Themes and click the Display icon. 

4. In the Display Properties, select Settings and then click Advanced. Select the Display

5. Click the enable button for Monitor or FPT device. And then click either OK or Apply to save the changes you have made

6. Select the settings as followed:

• Toggle the Fn + F6 to set the Panel (LCD), Monitor (CRT) or FPD (Flat Panel Display) as Single Mode or Clone Mode 

• To enabled the Extend Desktop Mode, Panel (LCD)+Monitor (CRT) or FPD. Click on Monitor 2. And then click on the “Extend my Windows desktop onto this Monitor"

• By uncheck the “Extend my  Windows desktop onto this monitor” it will disable the Extend Desktop Mode

   TV-Out Settings

Notice:

• To enable the TV-Out by default, connect the TV set to the S-Video out port before starting the computer. DVD playback to VCR will be scrambled by copyright protection technology.

Please follow the steps below:

1. Make sure you have loaded the correct Video driver that was provided by the manufacture.

2. Click the Start menu and select Control Panel. Click Appearance and Themes and click the Display icon. 

3. In the Display Properties, select Settings and then click Advanced. Select the Display

4. Click the enable button for TV device. And then click either OK or Apply to save the changes you have made

5. Select the settings as followed:

• Toggle the Fn + F6 to set the Panel (LCD) or TV as Single Mode or Clone Mode 

• To enabled the Extend Desktop Mode, Panel (LCD)+TV. Click on Monitor 2. And then click on the “Extend my Windows desktop onto this Monitor"

• By uncheck the “Extend my  Windows desktop onto this monitor” it will disable the Extend Desktop Mode